Welcome to this web site,qq:195109038
tuning fork density
Product introduction
RK086 Insert type tuning fork density
24-hour national online service:
025-84363968- Introduction
- List
- Notice
Operational principle
RK086 Insert type tuning fork density meter
is designed according to the theory of resonance. The vibration components is
similar to two teeth of the tuning fork, the fork body vibration because of a
piezoelectric crystal was located in the root of tooth, vibration frequency is
detected by a piezoelectric crystal , through shifting the phase and amplifying
circuit, the fork body is stable in the natural resonant frequency.
When the liquid flows through the fork body,
vibration changes, caused the change of resonant frequency, thus through
electronic processing unit to calculate accurate density value. The relationship
between vibration frequency and density as:
Insert type tuning fork density meter has
been widely used in industrial field, it is not afraid of hanging, not afraid of
the impact, high sensitivity. It using tuning fork "resonance" principle,
piezoelectric element is electrically driven by vibration, only probe rod
surrounded by material surrounded by the amplitude of vibration is sharply
reduced, resulting in switching action.
ρ=K0+K1T+K2T2
ρ=K0+K1T+K2T2
In the formula: ρ--liquid density
T--vibration period of sensor output
RECOMMEND
Hot line：025-84363968
Address：南京市棲霞區(qū)馬群科技園
Email：rankong163@163.com
- RECOMMEND
南京冉控科技有限公司 版權所有 蘇ICP備18060422號-1 Address：Nanjing Qixia Maqun Science Park
